Diy curtain rods – there are different styles of curtain rods. And also the forms used to hold them. But the principle of installation of all of them is more or less the same. Here we show you the three most frequent and used forms in this type of installation. The bars of the curtain, in combination with the terminals, have the great advantage of being decorative elements by themselves. Tat is, they do not need borders to cover them, although they do allow their installation if desired.
Unlike what happens when using rails, curtains installed on diy curtain rods do not necessarily require shirring, which allows using less amount of fabric. The length of the bar you determine, considering the fabric chosen for the curtain and the decorative effect you want to achieve. With a firm metallic metric tape measure the width of the window and add about 30 to 50 cm. on each side.
It is recommended to consider no less than 10 cms. To each side. If you are going to locate decorative terminals on the ends of the diy curtain rods. Make sure you leave enough space so that you can install them comfortably. Take the measurements of each of the windows. Although at first sight they look the same, they are not always the same.