Corner shower curtain rod – Occasionally, we have to place a curved shower curtain rod. The market offers us a wide range of bars; we have opted for a treated aluminum model, with invisible fixation and great stability. The first thing that we will have to do is to take the measure of the shower to adapt the supports. Transport the measure to the bar and cut at both ends of it, respecting the curve. And then to make this work we will use the miter box and an arc saw with metal blade.
We place on the tiles, where we are going to put the corner shower curtain rod. And some strips of bodybuilder’s tape so that the bit does not slip when drilling. Present the supports on the wall and mark the fixing points. We put an envelope on the wall so as not to stain when drilling and drill the holes with the drill at slow speed, without percussion at the beginning of the work, and with a wide bit.
Remove the tape, insert the studs and screw the brackets to the wall. We join the two pieces that compose the bar. We introduce it in the supports and we adjust with the screws of subjection. And then finish the work by placing the curtain on the bar with its corresponding washers. In this simple way, we will have finished placing a corner shower curtain rod.