Hanging lights in the lamp hanging from a rope or chain, they come in many styles, including a popular new style in which light itself is very small. In these designs “industrial pendant light fixtures“, the canopy, which goes through the roof, cannot be too small, because it has to cover the electrical box in the ceiling. In that sense, mini-pendant lights installed like any other light. Make sure the canopy of his light is at least as large as the existing fixture, so you do not have to touch up the paint on the ceiling.
Turn off the power to the industrial pendant light fixtures installation in existing home circuit box. Use a screwdriver to remove the screws holding the lamp in place existing. Separate cables that are above it to pull the water heater. Adjust the mounting bracket of your new appliance exposed to the electrical box and fasten it there with the screws provided.
Wrap the copper wire (ground) around the green ground screw in the mounting bracket and tighten the screw. Put the industrial pendant light fixtures together according to the manufacturer’s instructions. Take part canopy near the electrical box, with part of the light that sits at the top of the stairs. Press the canopy support, fixing wires in the electrical box.