Plug in wall sconce typically leverage existing power lines to increase the lighting in a room or area. The technology has created modern lights LED able to operate for long periods of time out of the battery power. Wall sconces that run on batteries can be mounted on any wall without making holes. The correct installation requires the creation of small holes for the screws, which are easily patched if necessary with composite putty.
Locate the studs in the wall with a detector for it. Locate the studs in the plug in wall sconce with a detector for it. Most wall sconces use two screws to secure the mounting plate on it. Marks the location of the edges of two adjacent uprights. Place the dish bracket against the wall between the two uprights. Mark the location of the screw holes.
Press screw anchor against the mark on the wall and hit it gently with a hammer to drive it through the drywall. Intervals to the anchorages with a screwdriver. Insert the screws in their holes and nail it to the anchorages with a screwdriver. Mount the plug in wall sconce in the mounting plate by following the instructions included with the accessory lighting.