Refinish kitchen cabinets – The final step in the refinishing of a kitchen cabinet, after removing the old finish and the application of the new wood stain, is to seal everything with brightness. This gives the piece a nice shine and seals the wood against heat and moisture damage in the kitchen. For a unique look, use shellac, which is one of the oldest and most natural forms of sheen? Its shine is more opaque and softer than polyurethane or varnish. When you put opaque shellac over time, you can apply new layers without having to remove the previous layers.
Ideas refinish kitchen cabinets, disassemble the cabin, removing all non-wood parts with the screwdriver. Place the pieces on a canvas. Load your manual sander with fine sandpaper and put on the face mask. Sand all wood surfaces of the cabinet just enough to remove surface dirt and dull the shine. Wipe off all the dust with a sticky rag.
Refinish kitchen cabinets, mix a solution of shellac with the same parts and alcohol in the bucket. Make enough to cover the cabinets. Brush the thin shellac over each part of wood, using the finishing brush. Apply a thin and smooth layer in the direction of the grain of the wood. Shellac the entire cabinet. Let the shellac dry for eight hours. Polish the surface by hand with extra fine sandpaper, using fast strokes of light enough to dull the brightness. Wipe off the dust with an antistatic cloth.